Share
Pin
Tweet
Send
Share
Send
Today you will learn how to make a ladybug, which is located on a piece of wood.
The following materials are needed for work:
- a piece of thick cardboard;
- newspaper;
- black colored paper;
- plastic bag;
- marker;
- scissors;
- a needle with a thread;
- pen or pencil;
- glue in a tube;
- self-adhesive film of green, red and black colors.
First, we cut out a piece of wood from thick cardboard. It can be of any shape.
Now it needs to be pasted over with a green self-adhesive film.
![](http://img.uaft2404.org/img/sdela-2019/bozhya-korovka.jpg)
We cut one piece of rectangular shape, a little more than the leaf itself.
![](http://img.uaft2404.org/img/sdela-2019/bozhya-korovka-2.jpg)
Wrap the edges of the film on the wrong side.
![](http://img.uaft2404.org/img/sdela-2019/bozhya-korovka-3.jpg)
Next, we cut the workpiece in the form of a cardboard base.
![](http://img.uaft2404.org/img/sdela-2019/bozhya-korovka-4.jpg)
And glue on the back of the leaf. The basis of the future crafts is ready.
![](http://img.uaft2404.org/img/sdela-2019/bozhya-korovka-5.jpg)
Now we turn to the manufacture of a ladybug.
Cut out an oval from cardboard with a small semicircle in front. This is the shape of the bug.
![](http://img.uaft2404.org/img/sdela-2019/bozhya-korovka-6.jpg)
We glue the blank on one side with a newspaper. This must be done so that the volume is obtained.
![](http://img.uaft2404.org/img/sdela-2019/bozhya-korovka-7.jpg)
We cut out two transparent wings from a plastic bag and draw stripes - veins with a black marker.
![](http://img.uaft2404.org/img/sdela-2019/bozhya-korovka-8.jpg)
We glue them on the blank of a ladybug, after pasting it with black colored paper.
![](http://img.uaft2404.org/img/sdela-2019/bozhya-korovka-9.jpg)
Now we cut out two blanks from ordinary cardboard - these will be rigid wings.
![](http://img.uaft2404.org/img/sdela-2019/bozhya-korovka-10.jpg)
We glue them on both sides with a red self-adhesive film and make cuts in the center.
![](http://img.uaft2404.org/img/sdela-2019/bozhya-korovka-11.jpg)
We connect the incisions so that the bends appear on the wings. Thanks to this, the bug will receive a stable volume.
![](http://img.uaft2404.org/img/sdela-2019/bozhya-korovka-12.jpg)
We fix hard red wings near the head of the insect. This can be done with a needle and thread.
![](http://img.uaft2404.org/img/sdela-2019/bozhya-korovka-13.jpg)
The place of attachment of parts must be decorated with a black self-adhesive film. We glue the head of the bug with it.
It remains only to glue 7 black circles cut out of the film.
![](http://img.uaft2404.org/img/sdela-2019/bozhya-korovka-14.jpg)
On the reverse side, our billet is generously greased with glue. And glue to the green leaf.
![](http://img.uaft2404.org/img/sdela-2019/bozhya-korovka-15.jpg)
![](http://img.uaft2404.org/img/sdela-2019/bozhya-korovka-16.jpg)
Now make 6 paws. You can take a cocktail tube, cut it into segments 1 cm long, glue it with a black self-adhesive film and bend it in half.
![](http://img.uaft2404.org/img/sdela-2019/bozhya-korovka-17.jpg)
Glue the paws to the body. We make two antennae.
![](http://img.uaft2404.org/img/sdela-2019/bozhya-korovka-18.jpg)
Here is such a magnificent ladybug turned out.
![](http://img.uaft2404.org/img/sdela-2019/bozhya-korovka-19.jpg)
A child can examine it, raise the upper elytra and examine the transparent wings.
![](http://img.uaft2404.org/img/sdela-2019/bozhya-korovka-20.jpg)
![](http://img.uaft2404.org/img/sdela-2019/bozhya-korovka-21.jpg)
![](http://img.uaft2404.org/img/sdela-2019/bozhya-korovka-22.jpg)
In addition, such a bright craft will be a wonderful decoration of the interior of your kids' room.
![](http://img.uaft2404.org/img/sdela-2019/bozhya-korovka-23.jpg)
![](http://img.uaft2404.org/img/sdela-2019/bozhya-korovka-24.jpg)
Share
Pin
Tweet
Send
Share
Send