In this review, the author shows how to make the simplest furnace for a cauldron with your own hands. To do this, he uses sheet metal.
To purchase stoves in the store is unprofitable, since they are made of thin metal and are not worth the money.
Therefore, in the presence of material and tools, of course, it is better to make a furnace for a cauldron with your own hands. Moreover, this is not difficult at all.
First of all, the author cuts off a strip of sheet metal with a width of 40 cm and a length of 1.25 m. It will need to be bent into a circle. We weld the edges together, and we get the capacity.
The main stages of work
At the next stage, in the sheet metal, you need to cut a hole for the chimney. If there is no plasma cutter, then you can use a grinder.
Next, cut off two pieces of a round pipe (on one side - at 45 degrees) and weld a knee from them. One part will be welded to the furnace, the second - a galvanized pipe is put on.
To adjust the thrust, the master decided to make a flap and install it inside the knee.
After that, you will need to make a door for laying firewood inside the fuel chamber, and also weld the bottom. In this case, the author uses a piece of metal of a square shape.
For details on how to make a furnace for a cauldron from sheet metal, see the video.
