A place in a home workshop should always be used rationally. And therefore, a cabinet for storing a tool with a folding table will definitely not be superfluous.
You can do it yourself. This will require profile pipes and plywood. Very often, these materials gather dust in a corner idle. There is a reason to use them with benefit.
You will also need to purchase furniture ball guides (for drawers) and swivel castors.
The first step is to determine the size of the cabinet. We cut from the profile pipe suitable along the length of the workpiece.
The main stages of work
At the next stage, from the previously cut preforms, it will be necessary to weld the frame of the cabinet.
Next, cut four more sections of the profile pipe and weld a rectangular frame. Then we attach it to the frame using two loops.
The author welds two short sections of the profile to the inside of the rectangular frame. Between them will be attached the supporting stand of the folding table.
After that, we cut a sheet of plywood 10 mm thick into blanks of the desired size. And fasten them to the frame.
Four wheels need to be fastened to the bottom, two of them with a locking mechanism.
In the end, it remains only to make drawers from plywood and install them on ball guides (they can be bought in the store).
For more information on how to make your own cabinet for storing a tool with a folding table, we recommend that you watch in the video below.
