Hand grinder for corn from a small angle grinder

Pin
Send
Share
Send

Need to grind corn grains quickly? This can be done with a homemade hand chopper. To do this, you will need an angle grinder.

Also, for the manufacture of this homemade product, pieces of sheet metal, a transition sleeve, a part of a plastic bottle are required. All these materials can be found without problems in the house and workshop.

The first step is to cut out a circle from sheet metal. In it, the author cuts a hole (in the center). Then you will need to weld the adapter sleeve, having previously drilled a hole of a suitable diameter.

The main stages of work

In the center of this disc, a home-made clamp is welded for mounting on a grinder. Then you will need to cut another circle with a large hole in the center. And around the circumference, the master welds a piece of strip.

Next, two round blanks (two sheet metal disks) will need to be joined together by welding. The result is a round box.

At the next stage, the author makes a cutting knife from a strip of metal, which will grind corn grains. Then you need to cut off a small disk and a piece of pipe. Workpieces are welded together with a metal mesh.

Now you need to paint all the details, and you can begin to assemble the device itself. For details on how to make a manual grinder for corn from a small angle grinder, see the video on our website.

Pin
Send
Share
Send

Watch the video: Mini Corn Mill from an Angle Grinder, How to. DIY. (November 2024).