With the help of a home-made tourist gas burner with one burner, you can cook or heat food while, for example, hunting, fishing, cottage or on a hike.
Moreover, the marching burner works from a gas spray. For the manufacture of this homemade product, the author uses a gas mask filter housing, an aluminum burner from a gas stove, as well as some other details.
First of all, it is necessary to use a knife to open the filter from the gas mask, like canned food, and remove all the "insides" from it. As a result, only the filter housing itself should remain.
The process of manufacturing a tourist burner
At the next stage, you will need a piece of tube with a diameter of about 6 mm, which is bent at an angle of 90 degrees, as well as a flare nut, a sleeve with internal and external threads, and a plug. We collect all the details together.
Further, in the lower part of the aluminum gas burner (in its "leg"), it will be necessary to drill through holes. Then you must insert the previously prepared assembly into the burner.
After that, four holes must be drilled around the circumference (10 mm in diameter) and three holes in its upper part (6 mm in diameter) in the gas mask filter housing. The author cuts part of the neck of the case with the help of angle grinders.
At the last stage, it remains only to drill a few more holes: one in the lower part of the body - under the hose, and two holes in the gas burner and the body.
Then a hose is put on the tube, which is connected through an adapter to a gas spray. Bolts, on which sleeves are put on, are inserted into the upper holes in the filter housing - dishes will stand on them. The handle from the grinder is screwed to the side.
For details on how to make a tourist gas burner with one burner with your own hands, see this video.
