The hair, as well as the hair of pets that enter the sewer, is one of the reasons for the formation of blockages in the sewer. However, this can be avoided by installing hair traps.
It will take literally 10-15 minutes to make these homemade traps. The author uses nylon cable ties as the main material.
By and large, the width of the ties does not matter much - you can use both narrow and wide cable ties. Therefore, what kind of screeds will be available, take these. For each drain, you will need several screeds.
The process of making a simple hair and wool trap
Making a hair trap is very simple. Of the basic tools you will need a knife and a building hair dryer. First of all, along the entire length of the nylon screed, it will be necessary to make notches that will retain hair.
Next, on the screeds, you need to make "ears". After that, the master wraps each screed on a plastic pipe, fixing the edges with masking tape, and heats up with a hairdryer. After such a heat treatment, the screeds will acquire a spiral shape.
The hair traps are ready and can now be installed in the drain hole. The only minus of this life hack is that cable ties cannot be installed in bathtubs and shower cabins, where there are traffic jams that open and close with pressure.
Details on how to make a simple hair trap in a sewer pipe from a nylon screed with your own hands can be found in the video on the website.
