Such an original lamp will become an adornment of any summer cottage or country house, and given that it is made of inexpensive materials, there is no price at all for it. Having decorated the territory with such lamps with stone stands, you will make the landscape design bright and unusual.
Materials and stages of work
For the manufacture of one street "stone" lamp, no more than nine flat stones of approximately the same size will be required. With each punch, it is necessary to drill two holes in each stone: one in the center with a diameter of 8 mm, the second with an edge with a diameter of 6 mm.
A large stone slab can be used as the base of the entire structure, in which two holes must also be drilled. To hold all the stones together, it is necessary to use an M8 hairpin of a suitable length.
First, it is inserted into the opening of the base, and then eight to nine flat stones are alternately "planted" on it. Along the way, through a second hole in the stones, it will be necessary to stretch a two-wire wire 2x0.75 mm.
On the inside of the base, as well as on top of the last flat stone, put the washer on the stud and tighten the nuts, and then tighten the entire structure well to give it more rigidity.
Lamp installation
We release the cartridge from the seat, and then on the lamp housing we drill a hole for the wire. Next, we drill the landing hole of the lamp under the M8 hairpin. After that, install the lamp on a "stone" structure, connect the wire, screw in the lamp and the lamp is ready.
So in this way, relatively inexpensively and quickly, you can ennoble a summer cottage or a house adjoining territory with interesting decorative elements made by yourself. The detailed process of creating a lamp with a stand made of stones can be seen in the video on our website.
