Share
Pin
Tweet
Send
Share
Send
Since the surface of the engine is contaminated by oil and dust during operation, it should be cleaned periodically.
![](http://img.uaft2404.org/img/sdela-2019/kak-ochistit-dvigatel-avtomobilya-samostoyatelno.jpg)
To clean the outer surface of the engine, special-purpose products must be used. For work, it is advisable to use a spray tool.
![](http://img.uaft2404.org/img/sdela-2019/kak-ochistit-dvigatel-avtomobilya-samostoyatelno-2.jpg)
Stages of engine cleaning.
1. First, apply a cleaner to the surface of the engine. In this case, the engine should not be hot. The temperature of the motor should be no more than 30 °. Such conditions contribute to better cleaning. Work must be done carefully so that the product does not fall into the face.
![](http://img.uaft2404.org/img/sdela-2019/kak-ochistit-dvigatel-avtomobilya-samostoyatelno-3.jpg)
2. It is imperative that the cleaning agent is sprayed into hard-to-reach areas of the engine.
![](http://img.uaft2404.org/img/sdela-2019/kak-ochistit-dvigatel-avtomobilya-samostoyatelno-4.jpg)
3. After the product has been applied to the surface of the engine, wait a while. For a period of 20 to 30 minutes, the cleaning agent will “corrode” the dirt and facilitate the further cleaning process.
![](http://img.uaft2404.org/img/sdela-2019/kak-ochistit-dvigatel-avtomobilya-samostoyatelno-5.jpg)
4. In the next cleaning step, the contamination must be washed off. Doing this job is more convenient and efficient with a variety of tools, such as a spray gun and compressor.
![](http://img.uaft2404.org/img/sdela-2019/kak-ochistit-dvigatel-avtomobilya-samostoyatelno-6.jpg)
5. The spray gun is attached to the compressor tube. Then fix the gun in a bottle of clean warm water.
![](http://img.uaft2404.org/img/sdela-2019/kak-ochistit-dvigatel-avtomobilya-samostoyatelno-7.jpg)
6. Then it is necessary to turn on the compressor and wash off the dirt from the surface of the engine under pressure.
![](http://img.uaft2404.org/img/sdela-2019/kak-ochistit-dvigatel-avtomobilya-samostoyatelno-8.jpg)
7. If necessary, repeat the work.
8. Finally, allow the engine surface to dry.
![](http://img.uaft2404.org/img/sdela-2019/kak-ochistit-dvigatel-avtomobilya-samostoyatelno-9.jpg)
Periodically clean the engine. Such work will extend the life of the engine for a long time.
Share
Pin
Tweet
Send
Share
Send