![](http://img.uaft2404.org/img/sdela-2019/kak-ustanovit-gruppu-rozetok-bez-raspaechnih-korobok.jpeg)
In this review, the author shows how to install sockets with your own hands without installing junction boxes.
That is, in this case, the connection of wires is carried out directly inside the socket. As for the sockets, they should be deep - 60-80 mm.
The main power cable enters one of the sockets. A second power cable emerges from the same socket. Inside the socket, they connect to the WAGO terminal blocks.
Triple terminal blocks are designed for "phase" and "zero", and the quadruple WAGO - serves exclusively for grounding.
The main stages of work
Three veins emerge from the first undergrowth: “zero”, “phase” and “earth”. We clean their ends.
Through the second socket, we pass two wires ("phase" and "zero"), after which we connect the wires to the connectors in the outlet.
As for sockets, the author recommends using sockets with a screwless connection option, since they are more reliable.
For a smooth installation of outlets (and even more so the outlet group), it is desirable to use a bubble level. In this case, the eye-diamond can fail.
Next, go to the second socket. First of all, you need to make the grounding wire commutation using a triple terminal block. Then we connect the wires to the outlet, as in the first case.
At the last stage, it remains only to connect a third outlet (in this case, you do not need to use a triple terminal block for grounding).
Next, install the plastic frame and the external parts of the outlet. Installation is ready.
For details on how to install a group of sockets without junction boxes with your own hands, see the video on the site.